Pneumatic industry,Diaphragm Valves of Bag House Filter, Personalized Customization
It can be used with pulse valve, solenoid valve, coil is an integral part of pneumatic system connection.The solenoid coil is composed of fixed iron core, moving iron core, coil and other parts.The valve body is composed of slide spool, slide sleeve and spring base.The solenoid coil is mounted directly on the valve body, which is enclosed in a sealed tube in a compact and compact combination.
◈ The tandard line of coils are rated for continuous duty operation. This means the coil can be left on continuously without fear of the magnet wire insulation breakdown, when used in standard climate conditions. The Unicoils and Super Coils are made of a high quality Class N magnet wire.This Class N rating signifies the internal wires are rated to 200°C (392°F).
◈Length: 72 mm
◈Width: 33.5 MM
◈High: 37 mm
◈Lower bore: 14.85mm
◈Upper bore: 10MM
◈ Voltages：The coil has a wide selection of coils available to meet your needs. Most coil terminations are available with our standard voltages of 12V and 24V in DC, and 120V and 240V in AC. Voltages 6V, 10V, 18V,36V, 48V DC and 440V AC are also available for many termination types at a slight premium. Contact your representative should your application call for voltages other than our standard offering.
◈ Installation requirements：The solenoid valve coils are generally screwed on. After a long time of work, the vibration will cause the screws to loosen. If the coil is pulled down, it may cause the coil to fall down.