It's a SC seires standard air cylinder. SC standard cylinders are suitable for use in various industries, especially in dust removal devices. This kind of cylinder is usually equipped with electromagnetic pulse valves for use together. A full range of accessory items are available including cylinder tube, piston, piston rod, sealing parts and mounting nut.
◈ Rod nut: Carbon steel
◈ Piston rod: Carbon steel with 20 μm chrome plated
◈ Front cover packing: TPU
◈Bushing: Wear resistant material
◈Front cover: Aluminum alloy
◈Cushing O-ring: NBR
◈ Cushion gasket: PU
◈ Barrel: Aluminum alloy
◈ Piston: Aluminum alloy
◈Piston rod O-ring: NBR
◈Piston seal: NBR
◈ Wear ring: Wear resistant material
◈Bolt: Carbon steel
◈Back cover: Aluminum alloy
◈Tie-rod: Carbon steel
◈Tie-rod nut: Carbon steel
◈ When load changes in the work, the cylinder with abundant output capacity shall be selected.
◈Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
◈Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
◈ Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
◈The medium used by cylinder shall be filtered to 40μm or below.
◈Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
◈ The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
◈If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
◈Packaging Details: Standard Carton box,and other special packing according to customer's requirement.
◈ Port: Ningbo/Shanghai
◈ Supply Ability: 1000 pieces per 12 working days
◈ Printing (Tension Control)
◈Semiconductor (spot welding machine, chip grinding)
◈Opening and closing doors of automobiles, metros and CNC machine tools
◈Mobile Positioning of Manipulator Coordinates
◈ Bore size: 40 mm
◈Acting type: Double acting
◈ Fluid: Air
◈ Operating pressure: 0.15~1.0 MPa
◈Proof pressure: 1.5 MPa
◈ Temperature: -20~70℃
◈ Cushion type: Variable cushion