AIRWOLF rodless pneumatic cylinder is inspected and scrutinized using different methods. It will be scrutinized by sight check or testing equipment for its dimensions, position, non-destructive inspection, and mechanical properties. 2.
The product features overheating protection. It has a secure device to prevent it from the high temperature when there is an accident. 3.
This product is safe to use. It has undergone a series of rigorous electrical testing in production and has meet the highest safety standards. 4.
Quality is what AIRWOLF CO, LTD pays the most importance to. 5.
Following through on the promises applies to AIRWOLF CO, LTD's every step of the customer-service process.
The main structure of the oil pressure buffer is composed of a body, a shaft, a bearing, an inner tube, a piston, a hydraulic shaft, a spring, etc., when the shaft is impacted by an external force, the hydraulic oil of the inner tube is squeezed by the piston, and the hydraulic oil is pressed. The oil drain hole of the inner tube is discharged one by one, and the hydraulic oil discharged from the inner tube is also returned to the inner tube by the oil return hole of the inner tube; when the external force disappears, the spring bounces the piston back to the next point to wait for the next action.
◈ Material:Carbon steel
◈ Head of the buffer:Nylon
◈Number of slides:300 W
◈Working temperature:-10 ~+85 ℃
Please aim the impact object at the center of the shaft so that the direction of movement of the object is consistent with the direction of the shaft core.
Eliminate shocks such as vibration and collision damage caused by non-mechanical motion.
Do not remove the front end cap, as unloading the cap will lengthen the piston rod and cause the piston rod to hit the bottom, which may break the bottom.
It is forbidden to paint on the teeth and the shaft, otherwise it will affect the heat dissipation and oil leakage.
Attention To AD Series Buffer
◈ Before using, set the adjustment knob to “4” and observe the impact effect before adjusting to the most appropriate position.
◈If "bang" sound is left at the end of the stroke of "4" scale, it indicates that the damping force of the product is too small and needs to be adjusted upwards
◈If there is a loud noise at the moment of contact, the damping force is too large and should be adjusted downward.
◈Need to increase or decrease step by step when adjusting, do not jump adjustment.Company Features1.
The company has a group of air pressure cylinder professional and technical personnel who are in the leading position in China. 2.
AIRWOLF CO, LTD bases itself on independent research and development and independent innovation. 3.
AIRWOLF entrepreneurs have gradually cultivated and formed the entrepreneurial spirit of rodless pneumatic cylinder . Check it! AIRWOLF CO, LTD has been responsible for developing a number of highly marketable pneumatic cylinder for years. Check it! High quality products, reasonable prices, high capacity and swift delivery are AIRWOLF CO, LTD's core aims. Check it!