AIRWOLF  >  AI - Page Sitemap  >  brass water solenoid valves ODM auto watering
brass water solenoid valves ODM auto watering

brass water solenoid valves ODM auto watering
  • brass water solenoid valves ODM auto watering
  • brass water solenoid valves ODM auto watering
  • brass water solenoid valves ODM auto watering
  • brass water solenoid valves ODM auto watering
  • brass water solenoid valves ODM auto watering
  • brass water solenoid valves ODM auto watering
  • brass water solenoid valves ODM auto watering

brass water solenoid valves ODM auto watering

If ignoring the importance of technology optimization, water solenoid valves could not have been so popular in the market.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. AIRWOLF CO, LTD has gained praises from home and abroad for its stainless steel solenoid valves for water that fully shows in water solenoid valves .
2. The product has many competitive advantages and is widely used in the field. Airwolf Automation has nearly 15 years of experience in manufacturing pneumatic components
3. This product has strong electromagnetic compatibility. It is not likely to be affected by external devices or cause intolerable electromagnetic interference to its surroundings. Established in 2006, Airwolf Automation continues its commitment to offering excellent quality
 
Detailed Description

It is a 1" Normal Close Water solenoid valve.Water solenoid valve has closed cavity, in a different location to open a hole, each hole leads to different tubing, cavity valve is among, both sides are two electromagnets, which face the magnet coil electricity body will be attracted to which side, by controlling the movement of the valve body blocked or leakage of different discharge of oil hole, and the oil hole is always open, hydraulic fluid will enter the different oil drain, and then through the oil pressure to push the cylinder piston, piston drives the piston rod, piston rod drive mechanism.Thus the mechanical motion is controlled by controlling the current of the electromagnet.

brass water solenoid valves ODM auto watering-1        
Features & Benefits

Model: 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50 Joint Pipe Bore:G1/8;G1/4;G3/8;G1/2;G1;G2.

Operation Fluid Viscosity:20 CST (Below)

Working-pressure:0~2.0MPa

Max. Pressure Resistance:3.5MPa

Operating Temperature Range:-5~+80℃

Standard voltage:AC220,AC110V,AC24V,DC24V,DC12V.

Voltage Range:±10%

Material of Body:2W:  Brass ; 2S:  Stainless Steel

Material of Oil Seal:NBR, EPDMVITON / NBR, EPDM or VITON

Type:Normal Close Type ;  Normal Open Type

Motion Pattern:Direct Drive Type

Working Medium: Air, Water, Oil, Gas,Fuel

Advantages
brass water solenoid valves ODM auto watering-2
                           
part.1
Direct-acting normally closed two solenoid valve, commutation quickly and sensitively
brass water solenoid valves ODM auto watering-3
                           
part.2
The structure is light and compact
brass water solenoid valves ODM auto watering-4
                           
part.3
Body material is stainless Steel
brass water solenoid valves ODM auto watering-5
                           
part.4
Suitable for a variety of working medium.


Application

Water solenoid valve is suitable for water or liquid as the working medium, can automatically control or remote control of water, oil, liquid and other working medium pipeline on and off.Because this valve USES the rubber seal, therefore to the working medium cleanliness greatly reduces, has opens and closes quickly, the reliability high characteristic.

brass water solenoid valves ODM auto watering-6        
Characteristics

The diaphragm structure with direct motion is adopted to start without pressure, which expands its application field

The use of flat diaphragm structure opening and closing reliable, and enhance the service life of the product.

The use of laminated coils improves the safety of the product in a wide variety of environments.

Installation

Solenoid valve is generally directional, can not be installed in reverse, usually on the valve body with "→" to indicate the direction of medium flow, installation should be in accordance with the direction of"→ "instructions

Manual shut-off valve should be added before and after the solenoid valve, and a bypass should be set to facilitate the maintenance of solenoid valve in case of failure.

Take care not to use too much sealing material when taking over.

Try not to let the solenoid valve in the power state for a long time, It will reduce the coil life or even burn out the coil, that is to say, often open, often closed solenoid valve can not be used interchangeably.


Company Features
1. If ignoring the importance of technology optimization, water solenoid valves could not have been so popular in the market.
2. The corporate culture of AIRWOLF CO, LTD includes stainless steel solenoid valves for water . Please contact.
AIRWOLF stainless steel solenoid valves for water avoids being exposed to a variety of chemicals during processing. And it is processed and sanitized thoroughly for the elimination of impurities like dirt, dust, and oil. With an advanced serve system, this product is reliable enough to operate
During the development stage of AIRWOLF stainless steel solenoid valves for water, different factors have been taken into consideration. They are mainly structure stability, statics, mechanical properties, the whole efficiency, etc. The energy-saving effect of this product has been greatly improved
AIRWOLF stainless steel solenoid valves for water goes through a complete design process. The design procedures include preliminary 3D solid modeling, finite element analysis of parts and assemblies, panel layouts, and PLC programming. This product has the ability to provide repeated production accuracy
AIRWOLF water solenoid valves has been designed by considering many critical factors. They include statics, dynamics, thermal performance, support points, yield points, etc. This product allows for an efficient conveying effect
The creation of AIRWOLF water solenoid valves involves some important factors. They include cutting lists, the cost of raw materials, fittings, and finish, the estimate of machining and assembly time, etc. The dust is not easy to accumulate on this product
The quality of this product has met the requirements of international standards. It is mainly controlled by a micro-computer, which guarantees the required precision
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...