Home  > PRODUCT  > Pneumatic air cylinders  >  SMC type RBC Series 15mm stroke RBC2015 165g with cap Shock Absorber
SMC type RBC Series 15mm stroke RBC2015 165g with cap Shock Absorber
SMC type RBC Series 15mm stroke RBC2015 165g with cap Shock Absorber
Minimum Order Quantity
1 piece
Price
Negotiation
Packaging Details
Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement
Delivery Time
within 1-10 working days after payment
Payment Terms
T/T , Western Union,Paypal
 
Detailed Description

The RBC series Self-compensation shock absorber are designed with high hardness stainless steel shaft, the shock absorber has better impact and corrosion resistance, and it can work under adverse conditions. The compact structure leads to high max. absorbed energy, and the special oiling process leads to stable shock absorbing. The outer body of integrated structure is treated by QPQ, which has optimum corrosion and wear resistance and can withstand high pressure; it is easy to install and adjust for all threaded outer body which has good heat dissipation.


       
Description

Ambient temperature range (°C): –10 to 80 (No freezing)

Collision speed (m/s):0.05 to 5.0

Stroke absorption (mm):15

Max. energy absorption (J): 58.8

Max. operating frequency ∗(cycle/min):25

Max. allowable thrust (N):1961


Advantages
                           
part.1
In order for the shock absorbers to operate accurately for long hours, it is necessary to select a model that is well-suited to your operating conditions. If the impact energy is smaller than 5% of the maximum energy absorption, select a model that is one class smaller.
                           
part.2

Specifications and operational instructions

Ensure that the collision speed, thrust, operation cycle, the ambient temperature
and atmosphere fall within the specifications.
∗Be aware of the min. installation radius in the case of rotating impacts.

                           
part.3
Using the equation suitable for the classification of impact.
                           
part.4
Taking into consideration the corresponding weight of the impacting object Me, calculated using Data D and collision speed υ, check provisional model compatibility with the condition of application. If this is satisfactory, then the said provisional model will be the applicable one.


Attention
1.  It is strictly prohibited to knock or collide the shaft, which may easily lead to bending of the shaft.
2. The surface of the shaft should not be covered with sewage or dirty oil, and the shaft must operate in a clean environment.Otherwise, it will increase the probability of product leakage and reduce the service life of the product.
3. It is strictly prohibited to spray paint on the pipe teeth and axis, otherwise it will affect the heat dissipation effect and oil leakage.




Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...