AIRWOLF CO, LTD upholds a fearless spirit towards making mistakes and constantly seeks innovations. Based on that, we overcome various difficulties during the development. We gain numerous honorary qualifications in the industry. AIRWOLF has a great geographical location with quite a few railways and highways nearby, which provides convenience for transportation. AIRWOLF has professional engineers and technicians, so we are able to provide one-stop and comprehensive solutions for customers. We can make design and product in line with your specifications.
How to set the height of mechanical filter equipment? Introduction to adaptive and efficient mechanical filtersThe adaptive high-efficiency mechanical filter adopts the adaptive fiber filter as the core application technology. the filter material used uses the theoretical physics principle-nonlinear scientific fractal structure, and the advantages are self-adaptability and fractal structure. It not only has the efficient filtration accuracy of the fiber filter material, but also has the advantages of using the particle filter material backwashing cleanliness and low water consumption, the pore distribution of filter bed formed by using this filter material is basically close to the ideal filter layer structure. when filtering, the filter material will gradually decrease from large to small along the direction of water flow, and the void ratio distribution in the same section is more uniform, the water flow is consistent in size when filtering.When filtering, due to the poor proportion of the
What happens when the inlet pressure of the mechanical filter is small, the inlet pressure is only 0.1-0. 2MPa, and how much is the flow rate appropriate? Blockage of imported pipelineOutlet, discharge unfavorable 1. water inlet pressure can only overcome the resistance of the filter element (pressure drop, pressure loss). the resistance of the filter element is related to the filtering accuracy. the higher the accuracy, the greater the resistance, generally, the precision of precision filtration is 0.2um, and the initial resistance of the filter element is 0. 005MPa, the final resistance (that is, the resistance when it needs to be replaced) is 0. 05MPa, so 0.1 ~ The inlet pressure of 0. 2MPa can work normally. 2. after the flow rate is generally selected in the engineering design, the pipe diameter of the pipeline is determined. the flow rate of low-pressure water is generally selected 1 ~ 3 m/s, the flow rate is too low to waste the cost of the pipeline, and the resistance of the pipeline with too high fl